Sprinkler Solenoid Valve Controller

The electric signal is converted into the water-moving command motor-type solenoid controller.
The solenoid controller can run reliably in all kinds of irrigation automatic control systems and match with all kinds of controllers.

Additional information

Interface type	BSP
Max working pressure	10bar

Two main components: a waterproof part and a three-way water flow base.
With a manual knob switch, and optional close-auto-open three modes.
Low energy consumption, can ensure the control cable’s long-distance laying.
There are two modes of AC (direct) current two-in-one power supply and DC Latch power supply.

Pressure range: 0-10 bar (0-140 psi)
Maximum ambient temperature: 60°C (140°F)
Maximum liquid temperature: 60°C (140°F)
Base interface size: 1/8″ BSP
Filtration coefficient requirements: more than 80 mesh
AC (direct) current type solenoid controller: voltage: 24V(minimum 18V, maximum 28V);
Open current:90 mA; Holding current: 75 mA
DC Latch type solenoid controller: voltage: 12-40V; Pulse width: minimum 80ms, maximum 500ms
The solenoid controller has two control lines, red and black. In DC and DC Latch power supply, red is connected to the positive stage, black is connected to the negative pole; With AC power, there is no difference between positive and negative.