Drip Irrigation Pipe 16mm
- Widely used in greenhouses, fruit trees, field crups and gardens, roof greening projects, and other irrigation fields.
- Reduce soil phlegm, enhance soil permeability, and promote root development.
- Applying water and fertilizer together increases fertilizer use efficiency and saves labor and fertilizers.
Additional information
| Max working pressure | 0.08-0.12mpa |
|---|---|
| Size | 0.6mm, 0.8mm, 1.0mm |
Product Details:
- Made of LDPE
- Inlay drip irrigation pipe design large area of the inlet filter, good anti-clogging performance.
- Adopt a new type of wide and long, full turbulent flow channel with a certain degree of compensation to ensure uniform dripping.
- One-time extrusion molding, built-in cylindrical patch dripper, there is drop spacing between drip-pers. The dripper will not be damaged or fall off during construction and movement.
- Material formula, lightweight, flexible, wear-resistant, anti-corrosion, anti-aging.
- Easy to install, use and maintain; easy to automate.
Parameters
- Nominal diameter:16mm
- Ordinary dripper flow rate: 1.6L/H; 2L/H; 4L/H
- Wall thickness:0.6-1.0mm
- Rolls per rmeter:500m
- Drop spacing: 300,500,1000mm
| Item NO. | Description | M/Roll | Measurement (Cm) | G.W (Kgs) | ||||
| Name | Dia | Thickness | Dripper Spacing | Flow Rate | ||||
| ICTB1606200 | Inlaid cylindrical drip irrigation pipe | 16mm | 0.6mm | 200mm | 2L/h、4L/h | 500 | Dn80*30 | 17 |
| ICTB1606300 | 300mm | Dn80*30 | 17 | |||||
| ICTB1606400 | 400mm | Dn80*30 | 16 | |||||
| ICTB1606500 | 500mm | Dn80*30 | 16 | |||||
| ICTB1608200 | 0.8mm | 200mm | Dn80*30 | 19 | ||||
| ICTB1608300 | 300mm | Dn80*30 | 18 | |||||
| ICTB1608400 | 400mm | Dn80*30 | 16 | |||||
| ICTB1608500 | 500mm | Dn80*30 | 17 | |||||
| ICTB1610200 | 1.0mm | 200mm | Dn85*30 | 26 | ||||
| ICTB1610300 | 300mm | Dn85*30 | 25 | |||||
| ICTB1610400 | 400mm | Dn85*30 | 23 | |||||
| ICTB1610500 | 500mm | Dn85*30 | 24 | |||||
Common drip-head type cylindrical drip irrigation pipe Recommended horizontal floor laying length (m)
| flow changes | flow rate(L/h) | Drop spacing(m) | ||||
| 0.3 | 0.4 | 0.5 | 0.6 | 1 | ||
| ±5% | 2.2 | 50.6 | 63.3 | 75.1 | 85.9 | 100.6 |
| ±7.5% | 58.8 | 73.5 | 86.3 | 99.4 | 116.8 | |
| ±10% | 65.5 | 81.2 | 96.7 | 110.7 | 129.6 | |
| ±5% | 4 | 32.4 | 40.8 | 48.5 | 56.5 | 86 |
| ±7.5% | 36.6 | 46.4 | 50.5 | 64.5 | 95 | |
| ±10% | 40.2 | 51.2 | 61.5 | 70.8 | 104 | |
(Note: Inlet pressure of 0.1 mpa, is recommended for different flow rates when the ground is flat )
Pressure VS flow rate
| flow rate | pressure（mpa）VS flow rate（L/h） | |||||
| 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0.3 | |
| 2.2L/h | 1.58 | 1.95 | 2.55 | 2.87 | 3.53 | 4.37 |
| 4.0L/h | 3.28 | 3.68 | 4.21 | 4.52 | 5.28 | 6.36 |
Working pressure suggestion: 0.08-0.12mpa
