16mm Drip tape
- Made of PE.
- The inner dripper has a small deviation and uniform flow.
- Made of high-quality materials and advanced production technology.
- It is corrosion-resistant, anti-aging, and durable.
- The drip tape is a one-shot extrusion with a lightweight and flat-roll package for easy transportation and storage.
- The head loss is small and the laying length is long.
- Inlaid flat dripper with new style wide and long flow channel, full turbulent flow,self-flushing and-good anti-clogging performance.
Additional information
| Max flow rate | 1.38L/H, 1L/H, 2.2L/H, 3.2L/H |
|---|
Product Details:
- Drip tape diameter: 16mm
- Drip tape wall thickness:0.2,0.3,0.4mm
- Working pressure:50-100kpa (0.2mm thickness); 50-150kpa (0.3,0.4mm thickness)
- Drop spacing:200,300,400 mm
- Dripper rated flow:1.38, 2.2, 3.0L/h
- Total roll: 1000,1500,2000m (Can be set arbitrarily within 0.1-2.5m according to user requirements)
Product Usage
- Widely used in greenhouses, fruit trees, field crops, and other fields
- Reduce soil phlegm, increase soil permeability, and promote root development
- Applying water and fertilizer to increase fertilizer using efficiency
- Especially for greenhouses, can reduce air temperature by 20%-30%, reducing the occurrence of pests and diseases, and increasing the low temperature by 2-3 degrees Celsius. The crop is listed in advance for about a week.
Notes
- Recommended work pressure: 0.8-1.0bar
- All holes are laid up
- Must be equipped with 120mesh filter rating
- Horizontal laying of the tape
- Avoid being damaged by insects and mice
- Drip irrigation under transparent film should prevent the water droplets from forming a convex mirror effect, and burning the surface under sunlight.
- Due to the thin wall thickness, mechanical damage due to overstretching should be prevented during the laying
Recommended horizontal laying length
| Flow Changes | Flow Rate | Drop spacing (m) | ||||
| 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | ||
| ±5% | 1.38L/h | 36 | 51 | 63 | ||
| ±7.5% | 43 | 59 | 72 | |||
| ±10% | 52 | 68 | 83 | |||
| ±5% | 2.2L/h | 63 | 75 | 85 | ||
| ±7.5% | 74 | 86 | 99 | |||
| ±10% | 65 | 96 | 119 | |||
| ±5% | 3.2L/h | 51.0 | 65.0 | 83.0 | ||
| ±7.5% | 59.0 | 73.0 | 87.0 | |||
| ±10% | 64.0 | 81.0 | 94.0 | |||
| (The inlet pressure is 0.1Mpa. When the ground is flat, different flow lengths are recommended.) | ||||||
Pressure VS flow rate
| Flow Rate | Pressure（MPa）VS Flow Rate（L/h） | |||||
| 0.02 | 0.04 | 0.06 | 0.08 | 0.10 | 0.12 | |
| 1.38L/h | 0.68 | 0.95 | 1.17 | 1.29 | 1.46 | 1.59 |
| 2.2L/h | 1.19 | 1.61 | 1.96 | 2.20 | 2.35 | 2.74 |
| 3.2L/h | 1.70 | 2.32 | 2.77 | 3.13 | 3.32 | 3.66 |
| (Recommended work pressure：0.08-0.10Mpa) | ||||||
