16mm Drip tape

Made of PE.
The inner dripper has a small deviation and uniform flow.
Made of high-quality materials and advanced production technology.
It is corrosion-resistant, anti-aging, and durable.
The drip tape is a one-shot extrusion with a lightweight and flat-roll package for easy transportation and storage.
The head loss is small and the laying length is long.
Inlaid flat dripper with new style wide and long flow channel, full turbulent flow,self-flushing and-good anti-clogging performance.

Additional information

Max flow rate	1.38L/H, 1L/H, 2.2L/H, 3.2L/H

Drip tape diameter: 16mm
Drip tape wall thickness:0.2,0.3,0.4mm
Working pressure:50-100kpa (0.2mm thickness); 50-150kpa (0.3,0.4mm thickness)
Drop spacing:200,300,400 mm
Dripper rated flow:1.38, 2.2, 3.0L/h
Total roll: 1000,1500,2000m (Can be set arbitrarily within 0.1-2.5m according to user requirements)

Widely used in greenhouses, fruit trees, field crops, and other fields
Reduce soil phlegm, increase soil permeability, and promote root development
Applying water and fertilizer to increase fertilizer using efficiency
Especially for greenhouses, can reduce air temperature by 20%-30%, reducing the occurrence of pests and diseases, and increasing the low temperature by 2-3 degrees Celsius. The crop is listed in advance for about a week.

Recommended work pressure: 0.8-1.0bar
All holes are laid up
Must be equipped with 120mesh filter rating
Horizontal laying of the tape
Avoid being damaged by insects and mice
Drip irrigation under transparent film should prevent the water droplets from forming a convex mirror effect, and burning the surface under sunlight.
Due to the thin wall thickness, mechanical damage due to overstretching should be prevented during the laying

Flow Changes	Flow Rate	Drop spacing (m)
Flow Changes	Flow Rate	0.1	0.2	0.3	0.4	0.5
±5%	1.38L/h	36	51	63
±7.5%		43	59	72
±10%		52	68	83
±5%	2.2L/h		63	75	85
±7.5%			74	86	99
±10%			65	96	119
±5%	3.2L/h			51.0	65.0	83.0
±7.5%				59.0	73.0	87.0
±10%				64.0	81.0	94.0
(The inlet pressure is 0.1Mpa. When the ground is flat, different flow lengths are recommended.)

Flow Rate	Pressure（MPa）VS Flow Rate（L/h）
Flow Rate	0.02	0.04	0.06	0.08	0.10	0.12
1.38L/h	0.68	0.95	1.17	1.29	1.46	1.59
2.2L/h	1.19	1.61	1.96	2.20	2.35	2.74
3.2L/h	1.70	2.32	2.77	3.13	3.32	3.66
(Recommended work pressure：0.08-0.10Mpa)